Verified from source documents for working lubrication data.
View source documentSource documents confirm this chemistry for match screening.
View source documentSource documents confirm this thickener base for compatibility review.
View source documentThis page is refreshed from approved source documents.
What is OKS 404?
OKS 404 is a grease used for bearing lubrication, splined shafts, and sliding surfaces. A useful replacement review should go beyond a simple cross-reference and verify the product definition, operating conditions, lubricant chemistry, and the reason a maintenance or procurement team needs another sourcing option.
The lubrication-temperature profile is -30°C to 200°C, base oil technology is mineral oil, polyalphaolefine, the required thickener base is lithium complex, the NLGI grade is 2. These details are the starting point for technical matching because they affect film stability, pumpability, separation risk, and service life under real equipment conditions.
Typical demand for OKS 404 alternatives is driven by regional availability, long lead times, price changes, distributor coverage, or lubricant standardization across multiple plants. At this stage, the goal is to define a qualified technical requirement that can be reviewed against source documents, availability, and private-label sourcing options.
Understanding OKS 404
- Product type
- Grease
- Common applications
- Bearing lubrication, splined shafts, sliding surfaces, and official TDS/pds/pdf source
- Typical industries
- Iron and steel, Shipbuilding, Chemical industry, and Industrial maintenance
- Lubrication temperature
- -30°C to 200°C
- Base oil technology
- mineral oil, polyalphaolefine
- Thickener base
- lithium complex
- Consistency requirement
- 2
Key performance characteristics
- Corrosion protection
- Oxidation resistance
- Pressure resistance
- Mineral oil, polyalphaolefine base oil technology
- Lithium complex thickener base
- High-temperature support around -30°C to 200°C, subject to actual continuous and peak operating conditions.
- Mineral oil, polyalphaolefine chemistry, which should be checked for oxidation behavior and changeover compatibility.
Compare related replacement guides
These pages are already receiving Google Search impressions. Use them to compare similar industrial lubricant replacement requests before adding new pages.
OKS 230 alternative and replacement guide
Review title, TDS/SDS checks, application fit, and replacement request details.
OKS 403 alternative and replacement guide
Review title, TDS/SDS checks, application fit, and replacement request details.
OKS 432 alternative and replacement guide
Review title, TDS/SDS checks, application fit, and replacement request details.
OKS 481 alternative and replacement guide
Review title, TDS/SDS checks, application fit, and replacement request details.
Bel-Ray Molylube 5% Moly Extreme Pressure Grease LC alternative and replacement guide
Review title, TDS/SDS checks, application fit, and replacement request details.
Bel-Ray PDS Molylube Multipurpose EP Grease alternative and replacement guide
Review title, TDS/SDS checks, application fit, and replacement request details.
OKS models in this library
Use this brand index to move from OKS 404 to other OKS models that already have published technical guides.
OKS48 related models
Why users look for OKS 404 alternatives
- Shutdown maintenance
- Supply chain gaps
- Private-label evaluation
- Local supply gaps
- Lead-time reduction
- Private-label match evaluation
- Maintenance standardization
Technical comparison
- OKS 404
- -30°C to 200°C
- Required match profile
- -30°C to 200°C
- OKS 404
- mineral oil, polyalphaolefine
- Required match profile
- mineral oil, polyalphaolefine
- OKS 404
- 2
- Required match profile
- 2
- OKS 404
- lithium complex
- Required match profile
- lithium complex
- OKS 404
- Bearing lubrication
- Required match profile
- Bearing lubrication
- OKS 404
- Iron and steel
- Required match profile
- Iron and steel
Why temperature matching matters
OKS 404 is being evaluated against a -30°C to 200°C lubrication-temperature requirement. Before sourcing an alternative, maintenance teams should check continuous temperature, peak temperature, startup conditions, contamination exposure, load, speed, and relubrication interval for the actual lubrication point.
Why lubricant chemistry matters
The base oil technology is mineral oil, polyalphaolefine. Base oil chemistry affects evaporation loss, oxidation resistance, low-temperature behavior, and compatibility with the existing lubricant in the lubrication point. If the site is changing brands, the new product should be reviewed for chemistry compatibility and purge or changeover requirements.
Why thickener and consistency matter
The required thickener base is lithium complex. The required NLGI grade is 2. Thickener system and consistency influence mechanical stability, water resistance, oil release, and how the lubricant stays in place. A replacement that matches temperature but differs sharply in thickener or consistency may behave differently under vibration, load, or repeated heating cycles.
Typical applications
Bearing lubrication
OKS 404 can be evaluated for bearing positions where heat, load, seal material, speed, and relubrication interval are known. When replacing it in a bearing, the alternative should be checked for oil separation, consistency retention, and compatibility with the existing maintenance interval across -30°C to 200°C.
Splined shafts
OKS 404 can be assessed for splined shafts where the operating temperature, contact materials, load, contamination exposure, and lubrication interval are known. Because the base oil technology is mineral oil, polyalphaolefine, chemistry matching should be part of the approval step.
Sliding surfaces
OKS 404 may be used on sliding interfaces that need controlled friction, wear protection, and stable lubricant film formation. A replacement should preserve the same contact behavior and should be reviewed for surface material compatibility before broad rollout.
Official TDS/pds/pdf source
OKS 404 can be assessed for official TDS/pds/pdf source where the operating temperature, contact materials, load, contamination exposure, and lubrication interval are known. Because the base oil technology is mineral oil, polyalphaolefine, chemistry matching should be part of the approval step.
Equipment context
- bearings
- sliding surfaces
- bearings contact surfaces
Industry use cases
Iron and steel: demand planning should focus on temperature exposure, load, contamination, downtime cost, and whether the plant can run a controlled trial before switching from OKS 404. The more critical the equipment, the more important it is to verify the current TDS, SDS, and operating conditions before approving any proposed match.
Shipbuilding: demand planning should focus on temperature exposure, load, contamination, downtime cost, and whether the plant can run a controlled trial before switching from OKS 404. The more critical the equipment, the more important it is to verify the current TDS, SDS, and operating conditions before approving any proposed match.
Chemical industry: demand planning should focus on temperature exposure, load, contamination, downtime cost, and whether the plant can run a controlled trial before switching from OKS 404. The more critical the equipment, the more important it is to verify the current TDS, SDS, and operating conditions before approving any proposed match.
Industrial maintenance: demand planning should focus on temperature exposure, load, contamination, downtime cost, and whether the plant can run a controlled trial before switching from OKS 404. The more critical the equipment, the more important it is to verify the current TDS, SDS, and operating conditions before approving any proposed match.
Replacement checklist
- 1Validate temperature range.
- 2Validate base oil compatibility.
- 3Validate thickener type.
- 4Validate base oil chemistry.
- 5Validate thickener compatibility.
- 6Validate operating duty cycle.
- 7Verify the actual lubrication temperature range and relubrication interval.
- 8Confirm base oil, thickener, NLGI grade, and drop point against the current TDS.
Validation plan before switching
Confirm the real operating window
Do not approve a proposed match only because the published temperature range looks similar. Record the continuous running temperature, short peak temperature, startup and shutdown conditions, and whether the lubrication point is exposed to washdown, dust, process chemicals, or outdoor weather. This prevents a replacement from passing on paper while failing in the real machine environment.
Check material and lubricant compatibility
Before switching from OKS 404, compare the current lubricant with the proposed product for base oil, thickener, additives, seal compatibility, and whether old grease must be purged. If mixed greases are likely to remain in bearings, housings, or lubrication lines, a technical reviewer should review compatibility guidance before starting the changeover.
Run a controlled first-use review
For critical equipment, introduce any proposed match through a limited maintenance trial. Track bearing temperature, noise, vibration, leakage, relubrication volume, lubricant condition, and operator feedback over the first service interval. The result gives purchasing and engineering a shared basis for approval instead of relying only on a catalog match.
Procurement review points
- Submit the requirement so a technical reviewer can classify any proposed match as an alternative, equivalent, or functional replacement for OKS 404. These terms are not identical: an equivalent implies closer technical alignment, while an alternative may still need engineering review.
- Request current TDS and SDS documents, packaging options, lead time, MOQ, shelf life, and country or region availability before changing the approved vendor list.
- If the site uses OKS 404 in multiple applications, separate the approval by lubrication point. A product that works in one bearing position may not automatically be approved for higher speed, higher load, washdown, or different relubrication intervals.
- Document the reason for change, the approval evidence, the first-use date, and the maintenance result. This makes future procurement audits and repeat orders easier.
Technical match request
This page turns the search for OKS 404 alternatives into a technical match request that can be evaluated against documents, operating conditions, availability, and private-label sourcing options. A stronger sourcing decision comes from matching the operating temperature, lubricant chemistry, consistency grade, application duty, and maintenance interval before any purchase request is submitted.
What a technical reviewer will match
- The required match profile should preserve the lubrication-temperature requirement: -30°C to 200°C.
- Base oil technology is mineral oil, polyalphaolefine, so our review should include chemistry evidence.
- The required thickener base is lithium complex, which should be checked for compatibility and mechanical stability.
- The application context includes bearing lubrication, splined shafts, and sliding surfaces.
- Actual suitability should be confirmed against manufacturer documentation and operating conditions after the requirement is submitted.
Any proposed match should be checked against the lubrication-temperature requirement of -30°C to 200°C and actual peak temperature.
The proposed match should preserve the mineral oil, polyalphaolefine chemistry unless engineering approves a change.
The lithium complex thickener base should be checked for compatibility, retention, and mechanical stability.
Application context includes bearing lubrication, splined shafts, and sliding surfaces.
Run document review and first-use monitoring before plant-wide changeover.
FAQ
Can OKS 404 be replaced?
OKS 404 can be replaced in many maintenance programs, but the replacement should be validated against the same technical envelope rather than approved by name alone. Start with temperature range, base oil chemistry, thickener system, NLGI or consistency data, and the exact application point. Then compare the latest TDS and SDS documents with the operating conditions on site. For critical equipment, use a controlled first-use trial before approving a plant-wide substitution.
What is equivalent to OKS 404?
This page is designed to define the sourcing requirement rather than claim a fixed equivalent. A true equivalent needs evidence that the operating temperature, lubricant chemistry, thickener system, application duty, and material compatibility are close enough for the actual lubrication point. Share the TDS, SDS, and site duty cycle so a technical reviewer can prepare a documented match request before the approved product list is changed.
Can OKS 404 be used in bearings?
OKS 404 may be used in bearing or general lubrication points only when the bearing type, speed, load, temperature, seal material, and relubrication interval match the documented product profile. A proposed replacement should be checked for NLGI grade, thickener compatibility, base oil chemistry, and oil separation behavior before changing the approved lubricant.
What temperature range should an equivalent support?
An equivalent should support the real operating envelope of the lubrication point, not just a headline number. Always compare continuous temperature, peak temperature, ambient conditions, load, speed, contamination exposure, and relubrication interval before approval.
How should replacement products be validated?
Validate replacements with document review first, then a limited trial. Check the TDS, SDS, application point, temperature range, base oil, thickener, NLGI grade, seal compatibility, load, speed, and relubrication interval. After that, run a controlled first-use review on the real equipment and track temperature, noise, vibration, leakage, lubricant condition, and maintenance feedback. If the trial is stable, the proposed match can move from review to approval.
What documents should be checked before replacing OKS 404?
Check the latest TDS, SDS, manufacturer product page, OEM maintenance guidance, and any site-specific lubrication standard before replacing OKS 404. PDF source documents are especially important because industrial lubricant specifications are often more complete than product web pages. The review should capture temperature range, base oil, thickener, consistency, drop point if available, material compatibility, safety handling, and any limitations stated by the manufacturer.
What is the biggest risk when switching from OKS 404?
The biggest risk is approving a substitute without validating the actual duty cycle against the -30°C to 200°C temperature requirement, seal compatibility, contamination exposure, and relubrication interval. A replacement can look similar in a table but behave differently under heat, load, vibration, or mixed-lubricant conditions. For important equipment, the safer path is document review, engineering confirmation, and a monitored first-use trial before plant-wide rollout.
Technical source documents
Verified data points
OKS 404: -30 °C to 200 °C
Description Semi-synthetic lithium complex soap grease with a wide range of applications in a wide range of temperatures.
View source documentOKS 404: lithium complex
Description Semi-synthetic lithium complex soap grease with a wide range of applications in a wide range of temperatures.
View source documentOKS 404: > 260 °C
OKS 404 High-Performance and High-Temperature Grease Technical data Standard Conditions Unit Value Main components base oil mineral oil base oil polyalphaolefine thickener lithium-complex soap Appl...
View source documentOKS 404: mineral oil, polyalphaolefine
OKS 404 High-Performance and High-Temperature Grease Technical data Standard Conditions Unit Value Main components base oil mineral oil base oil polyalphaolefine thickener lithium-complex soap Appl...
View source documentOKS 404: 2
Application tips For optimum effect, carefully clean the lubricating point, for example with OKS 2610/OKS 2611 universal cleaner.
View source documentOKS 404: OKS 404 -> documented match profile
High-performance grease with similar temperature range and lithium complex thickener for bearing lubrication applications.
View source document- Source document 1oks-germany.com
Related high temperature grease alternatives guides
View all high temperature grease alternatives guidesROCOL BIOGEN WIRESHIELD alternative and replacement guide
Compare source documents, technical fit, applications, and replacement checks for this related guide.
Shell Gadus S3 V220C 2 alternative and replacement guide
Compare source documents, technical fit, applications, and replacement checks for this related guide.
Shell Gadus S3 V460D 2 alternative and replacement guide
Compare source documents, technical fit, applications, and replacement checks for this related guide.
Shell Gadus S3 V220C 1 alternative and replacement guide
Compare source documents, technical fit, applications, and replacement checks for this related guide.
Ready for review
Send your operating conditions for a documented match
Include the current product, equipment, temperature range, load, speed, region, and any TDS/SDS files. The request helps classify the demand as an alternative, equivalent, or replacement case before quotation.
Share requirement